Monoblock multistage horizontal pumps MXH 32, 48

Monoblock multistage horizontal pumps MXH 32, 48

Design

Monoblock horizontal multistage pumps made of chromium-nickel steel.
Compact and robust design, no protruding flanges and solid connection between pump and motor with support legs.
The pump housing is monolithic, open only on one side (drum type), the front suction bell is located above the pump shaft and the radial supply bell is at the top.
Fill and drain plugs in the middle line, accessible from either side (like a clamp box).

Application

Water supply.
Pumping of clean liquids that do not contain abrasive impurities and are not aggressive to stainless steel (on request, pumps with seals made of special materials are available).
Universal pump, use in everyday life, in industry, in garden plots and for irrigation.

Operating restrictions

Liquid temperature from -15°С to +110°С. 
The ambient temperature is not more than 40°С.
Maximum allowable final pressure in the pump housing: 8 bar.

electric motor

Induction motor, 2-pole, 50 Hz, 2900 rpm.
MHN: three-phase up to 3 kW - 230/400 V (± 10%); from 3.7 to 4 kW - 400/690 V (±10%). 
MXHM : single-phase 230V (±10%), with thermal protector Capacitor built into the junction box.
Class "F" insulation.
Protective device IP 54.
Design according to standards:
IEC 60034;
IEC 60038;
IEC 60335-1,
EN 60335-1;
IEC 60335-2-41,
EN 60335-2-41;

Special executions on request

- other voltages
- frequency 60 Hz (see catalog for frequency 60 Hz)
- with protection device IP 55 - special mech. seals
- Viton O-rings
- for media with higher or lower temperatures.

  Specifications:

n = 2900 rpm

Monoblock multistage horizontal pumps MXH 32, 48