Deep well submersible pumps 6", 8" and 10" SDS

Deep well submersible pumps 6", 8" and 10" SDS

Deep well submersible pumps 6", 8" and 10" SDS

Design

Submersible electric pumps for deep wells with diameters 6" (DN 150 mm), 8" (DN 200 mm) and 10" (DN 250 mm).
Impellers: Semi-axial
Flare: Threaded according to ISO 228 for mod.
6SDS overlapping for models 8SDS, 10SDS Non-return valve integrated in the delivery body.

Application

Water supply.
Household and industrial application.
in fire fighting installations.
Irrigation.

Operating restrictions

The water temperature is not more than 25°C.
Maximum amount of sand in water: 150 g/m3
. Continuous operation.

Replaceable winding motor CS 6",8",10"

Induction motor, 2-pole, 50 Hz, 2900 rpm.
Water replaceable winding.
Connection sizes according to NEMA standards.
Voltage:
- three-phase: 400 V; 400/690 V.
Voltage change +6% /-10%.
Start recommended for powers of 7.5 kW and above:
star/delta, soft start or stator resistance.
EnginesWater temperature no moreCooling:
minimum flow rate
Maximum
number of starts
6"25 °С0.20 cm/ 
s for 4-15 kW 0.50 cm/s for 18.5-30 kW
fifteen
eight"25 °С0.20 cm/s for 30 - 51 kW 
0.50 cm/s for 55 - 75 kW
fifteen
10"25 °С0.50 cm/sec10
Protection class IP 68. Winding wires made of PVC.

Cable

Motor 400V - 50Hzcross sectionLength
6CS 4-22 kW3 x (1x4) mm23.5 m
6CS 26 - 30 kW3 x (1x6) mm23.5 m
8CS 30 kW3 x (1x6) mm24 m
8CS 37 - 45 kW3 x (1x10) mm24 m
8CS 51- 59 kW3 x (1x16) mm24 m
8CS 66 - 75 kW3 x (1x25) mm24 m
8CS 92 kW3 x (1x35) mm24 m
10CS 85-130 kW3 x 50 mm26 m
10CS 150-185 kW3 x 50 mm26 m
Special executions on request
- Other voltages.
- Frequency 60 Hz (see catalog for 60 Hz).
- For liquids with higher temperatures.
- FK engine
Part Part No.6, 8, 10SDSB-6, B-8, B-10SDS
Stage body 25.02
Diffuser 26.00 Impeller
28.00
Cast iron GJL 200 EN 1561Bronze G-Cu Sn 10 EN 1982
Seal, ringRubber (Bronze 10SDS 190-280)
Val 64.00Steel F51 duplex
10SDS Steel Cr AISI 420
Steel Cr-Ni-Mo AISI 316
Shaft cover 64.08Chrome-plated brass (only in mod. 10SDS)
Feeding housing parts 12.01
Suction sleeve 32.02
Cast iron GJL 200 EN 1561Bronze G-Cu Sn 10 EN 1982
Guide bearing12.03-12.30Rubber
Filter 15.50Steel Cr-Ni AISI 304
screwsSteel Cr-Ni AISI 304

Engine

Part6", 8", 10" standard6", 8", 10" AISI 316
outer frameSteel Cr-Ni AISI 304
(AISI 316Ti motor 10")
Steel Cr-Ni-Mo AISI 316 Ti
supportsCast iron GJL 200 EN 1561Steel Cr-Ni-Mo AISI 316
ShaftSteel AISI 420 heat treated
(Cr-Ni-Mo AISI 329 engine 10")
Steel Cr-Ni-Mo AISI 429
Axial bearingOscillating plates
guide bearingGraphite (bronze for engines 8" power 51 - 66 kWGraphite


Submersible pumps for deep wells with a diameter of 6, 8 and 10 SDS

download the entire  calpeda              catalog download the SDS catalog

download SDS manual              download SDS spare parts

                                      download calpeda price list

Specifications:

n = 2900 rpm Diameter 6''

380VkWQ (m3/h)Q (l/min)H(m)
6SDS 32/3412 - 42200 - 70039 - 18
6SDS 32/45.512 - 42200 - 70052 - 24
6SDS 32/57.512 - 42200 - 70065 - 30
6SDS 32/67.512 - 42200 - 70078 - 36
6SDS 32/79.212 - 42200 - 70092 - 42
6SDS 32/8eleven12 - 42200 - 700105 - 48
6SDS 32/913 (15)12 - 42200 - 700118 - 54
6SDS 32/1013 (15)12 - 42200 - 700131 - 60
6SDS 32/11fifteen12 - 42200 - 700144 - 66
6SDS 32/12fifteen12 - 42200 - 700157 - 72
6SDS 32/1318.512 - 42200 - 700170 - 78
6SDS 32/14<

Deep well submersible pumps 6", 8" and 10" SDS


pump calpeda 10SDS160/1 without electric motor

pump calpeda 10SDS160/1 without electric motor

pump calpeda 10SDS160/1 without electric motor Head:32.5m Flow :140m3/h Pump power: 18.5kw Pump type : borehole Voltage : 380V Pump material : cast iron Impeller material :cast iron Impeller type :centrifugal Pump location :submersible pump diameter: 263mm. Type of connection:thread Spigot diamete..

0.00грн.

pump calpeda 10SDS160/2 without electric motor

pump calpeda 10SDS160/2 without electric motor

pump calpeda 10SDS160/2 without motor Head:65m Flow :140m3/h Pump power: 37kw Pump type : borehole Voltage : 380V Pump material : cast iron Impeller material :cast iron Impeller type :centrifugal Pump location :submersible pump diameter: 263mm. Type of connection :thread Nozzle diameter :7inch Desi..

127,715.00грн.

pump calpeda 10SDS160/3 without electric motor

pump calpeda 10SDS160/3 without electric motor

pump calpeda 10SDS160/3 without electric motor Head:98m Flow :140m3/h Pump power: 55kw Pump type : borehole Voltage : 380V Pump material : cast iron Impeller material :cast iron Impeller type :centrifugal Pump location :submersible pump diameter: 263mm. Type of connection :thread Nozzle diameter :7i..

156,866.00грн.

pump calpeda 10SDS160/4 without electric motor

pump calpeda 10SDS160/4 without electric motor

pump calpeda 10SDS160/4 without electric motor Head:130m Flow :140m3/h Pump power: 75kw Pump type : borehole Voltage : 380V Pump material : cast iron Impeller material :cast iron Impeller type :centrifugal Pump location :submersible pump diameter: 263mm. Type of connection :thread Nozzle diameter :7..

184,131.00грн.

pump calpeda 10SDS160/8 without electric motor

pump calpeda 10SDS160/8 without electric motor

pump calpeda 10SDS160/8 without electric motor Head:260m Flow :140m3/h Pump power: 150kw Pump type : borehole Voltage : 380V Pump material : cast iron Impeller material :cast iron Impeller type :centrifugal Pump location :submersible pump diameter: 263mm. Type of connection :thread Nozzle diameter :..

293,806.00грн.

pump calpeda 10SDS190/3 without electric motor

pump calpeda 10SDS190/3 without electric motor

pump calpeda 10SDS190/3 without motor Head:91m Flow :180m3/h Pump power: 66(75 )kW Pump type : borehole Voltage : 380V Pump material : cast iron Impeller material : cast iron Impeller type :centrifugal Pump location : submersible pump diameter: 263mm. Type of connection:thread Connection diameter :..

156,866.00грн.

pump calpeda 10SDS280/3 without electric motor

pump calpeda 10SDS280/3 without electric motor

pump calpeda 10SDS280/3 without electric motor Head:75m Flow :240m3/h Pump power: 75kw Pump type : borehole Voltage : 380V Pump material : cast iron Impeller material :cast iron Impeller type :centrifugal Pump location :submersible pump diameter: 263mm. Type of connection :thread Nozzle diameter :7i..

172,569.00грн.

pump calpeda 10SDS280/5 without electric motor

pump calpeda 10SDS280/5 without electric motor

pump calpeda 10SDS280/5 without motor Head:125m Flow :240m3/h Pump power: 130kw Pump type : borehole Voltage : 380V Pump material : cast iron Impeller material :cast iron Impeller type :centrifugal Pump location :submersible pump diameter: 263mm. Type of connection :thread Nozzle diameter :7inch De..

227,509.00грн.

pump calpeda 6SDS42/10 without electric motor

pump calpeda 6SDS42/10 without electric motor

calpeda 6SDS42/10 pump without electric motor Head:107m Flow :36m3/h Pump power: 18.5kw Pump type : borehole Voltage : 380V Pump material : cast iron Impeller material :cast ironcast iron Impeller type :centrifugal Pump location :submersible pump diameter: 153mm. Type of connection:thread Nozzle dia..

84,419.00грн.

pump calpeda 6SDS42/11 without electric motor

pump calpeda 6SDS42/11 without electric motor

pump calpeda 6SDS42/11 without electric motor Head:118m Flow :36m3/h Pump power: 18.5kw Pump type : borehole Voltage : 380V Pump material : cast iron Impeller material :cast ironcast iron Impeller type :centrifugal Pump location :submersible pump diameter: 153mm. Type of connection:thread Nozzle dia..

91,266.00грн.

pump calpeda 6SDS42/12 without electric motor

pump calpeda 6SDS42/12 without electric motor

pump calpeda 6SDS42/12 without electric motor Head:128m Flow :36m3/h Pump power: 22kw Pump type : borehole Voltage : 380V Pump material : cast iron Impeller material :cast iron Impeller type :centrifugal Pump location :submersible pump diameter: 153mm. Type of connection :thread Nozzles diameter:3in..

97,908.00грн.

pump calpeda 6SDS42/14 without electric motor

pump calpeda 6SDS42/14 without electric motor

pump calpeda 6SDS42/14 without motor Head:150m Flow :36m3/h Pump output: 26(30 )kW Pump type : borehole Voltage : 380V Pump material : cast iron Impeller material : cast iron Impeller type :centrifugal Pump location : submersible pump diameter: 153mm. Type of connection :..

110,372.00грн.

pump calpeda 6SDS42/15 without electric motor

pump calpeda 6SDS42/15 without electric motor

pump calpeda 6SDS42/15 without electric motor Head:160m Flow :36m3/h Pump output: 26(30 )kW Pump type : borehole Voltage : 380V Pump material : cast iron Impeller material : cast iron Impeller type :centrifugal Pump location : submersible pump diameter: 153mm. Type of connection :..

118,941.00грн.

pump calpeda 6SDS42/16 without electric motor

pump calpeda 6SDS42/16 without electric motor

pump calpeda 6SDS42/16 without electric motor Head:171m Flow :36m3/h Pump power: 30kw Pump type : borehole Voltage : 380V Pump material : cast iron Impeller material :cast iron Impeller type :centrifugal Pump location :submersible pump diameter: 153mm. Type of connection :thread Nozzles diameter:3in..

125,419.00грн.

pump calpeda 6SDS42/17 without electric motor

pump calpeda 6SDS42/17 without electric motor

pump calpeda 6SDS42/17 without electric motor Head:182m Flow :36m3/h Pump power: 30kw Pump type : borehole Voltage : 380V Pump material : cast iron Impeller material :cast iron Impeller type :centrifugal Pump location :submersible pump diameter: 153mm. Type of connection :thread Nozzles diameter:3in..

132,553.00грн.

Showing 1 to 15 of 71 (5 Pages)