Jet self-priming NGL pumps

Jet self-priming NGL pumps

Jet self-priming NGL pumps

Design

Self-priming monoblock centrifugal pump with built-in ejector.

Application

Water supply from wells.
For lifting water containing air or other gases.
To increase the pressure of water supplied to the pump
by gravity when operating under hydraulic pressure.
To increase the pressure of water from the distribution network (observe local regulations).
For clean water or lightly soiled surfaces.
Use in garden areas.
For washing with a strong water jet.


Operating restrictions

Liquid temperature from 0 to +35 °C.
The ambient temperature is less than 40 °C.
Final pressure in the pump housing: 8 bar.
Continuous operation.

electric motor

Induction motor, 2-pole, 50 Hz, 2800 rpm.
NGL: Three-phase 230/400V ±10%
NGLM: Single-phase 230V ±10% with thermal protector.
The capacitor is built into the terminal box.  CEI 61–69).

Special executions on request

other voltages
frequency 60 Hz (see catalog for frequency 60 Hz)
with protection device IP 55
ComponentNGL
Pump housing 
 
Cast iron GJL 200 EN 1561
case cover
Working wheelBrass P-Cu Zn 40 Pb 2 UNI 5705
Sealing ring between impeller and diffuserChrome nickel steel 1.4301 EN 10088 (AISI 304)
DiffuserPPO-GF20 (Noril)
EjectorPPO-GF20 (Noril)
Shaft
Fur.  sealCharcoal-ceramic-NBR

download the entire   calpeda catalog            

download NGL manual                           download NGL spare parts

                                      download calpeda price list


Self-priming flow pumps NGL

Specifications:

n = 2800 rpm

380V220VkWQ (m3/h)Q (l/min)H(m)
NGL 2NGLM 20.450 - 2.30 - 38.345 - 19
NGL 3NGLM 30.550 - 2.80 - 46.653 - 22
NGL 4NGLM 40.750 - 4.80 - 8042-19

self-priming jet pumps NGL

self-priming jet pumps NGL

self-priming jet pumps NGL

Jet self-priming NGL pumps


Calpeda NGLM2 pump

Calpeda NGLM2 pump

calpeda NGLM2 pump Head :30m Flow :1m3/h Pump power: 0.45kw Pump type : self-priming up to 9m Voltage : 220V Pump material : cast iron Impeller material :brass Impeller type :centrifugal Pump location :horizontal Type of connection :thread Spigot diameter :1x1inch Calpeda NGLM2 pump design.Self-p..

6,929.00грн.

pump calpeda NGL3/A

pump calpeda NGL3/A

pump calpeda NGL3/A Head :30m Delivery:2m3/h Pump power: 0.55kw Pump type : self-priming up to 9m Voltage : 380V Pump material : cast iron Impeller material :brass Impeller type :centrifugal Pump location :horizontal Type of connection :thread Spigot diameter :1x1inch Calpeda NGL3/A pump design.S..

8,200.00грн.

Showing 1 to 2 of 2 (1 Pages)