Pumps with peripheral impeller CT60, CT61
Monoblock pumps with working peripheral wheel. Compact design, patented, with movable motor housing side cover (replaceable when worn). The motor is protected from water ingress from outside. Bronze pumps are supplied fully painted.
for clean, non-explosive liquids that do not contain abrasive and suspended particles and are not aggressive to the materials from which the pump is made.
to increase the pressure supplied from the distribution network (observe local standards). Due to their small dimensions, these electric pumps are excellently suited for installation in various devices and apparatuses of cooling, air conditioning and circulation systems. .
Fluid temperature less than 60°C.
The ambient temperature is less than 40°С.
Manometric suction lift no more than 7 m.
Induction motor, 2-pole, 50 Hz, 2900 rpm.
CT 61: three-phase - 230/400 V (±10%)
CTM 61: mono-phase 230 V (±10%) with thermal protection device Capacitor built into the terminal box.
Class "F" insulation.
Protective device IP 54.
Device in accordance with EN 60335-2-41.
Special executions on request
frequency 60 Hz (see catalog for frequency 60 Hz)
with protection device IP 55
Component ST 61 V-ST 61 Pump housing Cast iron GJL 200 EN 1561 Bronze G-Cu Sn 10 EN 1982 Engine side cover Brass R-Cu Zn 40 Pb 2 UNI 5705 Working wheel Brass R-Cu Zn 40 Pb 2 UNI 5705 Shaft Chrome steel AISI 430 Fur. seal Charcoal - Ceramics - NBR Component ST 60 V-ST 60 Pump housing Cast iron GJL 200 EN 1561 Bronze G-Cu Sn 10 EN 1982 Engine side cover Brass R-Cu Zn 40 Pb 2 UNI 5705 Working wheel Brass R-Cu Zn 40 Pb 2 UNI 5705 Shaft Chrome steel AISI 430 Fur. seal Charcoal - Ceramics - NBR
n = 2900 rpm
Showing 1 to 4 of 4 (1 Pages)