graphite bushings for dishwashers

graphite bushings for dishwashers

graphite bushings for dishwashers

Graphite bushings (plain bearings made of graphite) for dishwasher pumps, heating pumps and circulation pumps, heat pumps.

Graphite bushings (plain bearings made of graphite) for dishwasher pumps, heating pumps and circulation pumps, heat pumps. Our graphite bushings have a better performance compared with homemade bushings made of plastic, polyamyl, metals and other materials not similar to graphite, all these materials tend to heat up, expand and rust, which leads to the failure of not only the pump itself, but also the failure of expensive equipment. Our graphite rack bushings to the majority of solvents and other chemicals that can be used during the repair of equipment or the operation of the pump in an environment with chemically active substances during the operation of the dishwasher, it does not collapse in aggressive environments - powder, detergent, and other chemicals for dishwashers. Graphite bushings do not expand in liquid and during pump operation, in places of friction of the rotor and the pump bushing. Graphite bushings, unlike their fakes are silent and have self- lubricating properties due to the graphite crystal lattice.

Graphite bushings are used by the following manufacturers of dishwashers -  Ariston, Beko, Bosh, Electrolux, Indezit  ,  Siemens, Whirlpool, Zanussi  and other manufacturers

Graphite bushings (plain bearings made of graphite) for dishwasher pumps, heating pumps and circulation pumps, heat pumps.


Table No. 1. The dimensions of the graphite bushings are indicated in millimeters (mm).

a type

d1

d2

d3

h1

h2

h3

14*8.6

14

10.2

5

8.6

5.2

3.4

14*9.6

14

10.2

5

9.6

6

3.6

15*12.1

15

10.2

6

12.1

6

6.1


We offer graphite bushings with dimensions  14×8.6×5  14×9.6×515×12.1×6  or other name plain bearings  14×8.6×5  14×9.6×515×12.1×6 for dishwasher pumps .

main dimensions

d1 outer ring diameter, dimension in (mm)

d2 tine diameter, dimension in (mm)

d3 pump shaft diameter, dimension in (mm)

h1 bushing height, dimension in (mm)

Sleeve  bearings  for  the Askoll M233 pump , which are made of materials other than graphite  , are not desirable  to be installed in heat and circulation pumps that are used in the food industry. Do not forget that other material expands when heated, which leads to failure of the pump as a whole. All dimensions must be identical in our dishwasher sleeve size chart above.

Bushings for pump pump Bleckmann dishwasher 14x8.6x5

Graphite bushings 14x8.6x5  for the Bleckmann pump dishwasher pump repair kit are made of siliconized graphite and have an optimal density for pump operation, this material will enable the pump to work for long-term use and high-quality operation of the dishwasher pump.

These bushings are made of graphite, which performs well in aquatic environments containing chemical additives. Bushings for dishwashers do not require maintenance and the use of lubricants. Graphite plain bearings withstand high temperature operating conditions. Graphite bushings are not affected by aggressive media found in dish washing powders.

Many of our sleeves  are suitable for circulation and heat pumps of dishwashers  manufactured by Siemens, Bosch, Indesit, Ariston, Beko, Elektrolux, Zanussi and others. 

graphite bushings for dishwashers


There are no products to list in this category.