Jet self-priming NGL pumps
Self-priming monoblock centrifugal pump with built-in ejector.
Water supply from wells.
For lifting water containing air or other gases.
To increase the pressure of water supplied to the pump
by gravity when operating under hydraulic pressure.
To increase the pressure of water from the distribution network (observe local regulations).
For clean water or lightly soiled surfaces.
Use in garden areas.
For washing with a strong water jet.
Liquid temperature from 0 to +35 °C.
The ambient temperature is less than 40 °C.
Final pressure in the pump housing: 8 bar.
Induction motor, 2-pole, 50 Hz, 2800 rpm.
NGL: Three-phase 230/400V ±10%
NGLM: Single-phase 230V ±10% with thermal protector.
The capacitor is built into the terminal box. CEI 61–69).
Special executions on request
frequency 60 Hz (see catalog for frequency 60 Hz)
with protection device IP 55
|Pump housing ||Cast iron GJL 200 EN 1561|
|Working wheel||Brass P-Cu Zn 40 Pb 2 UNI 5705|
|Sealing ring between impeller and diffuser||Chrome nickel steel 1.4301 EN 10088 (AISI 304)|
n = 2800 rpm
Showing 1 to 6 of 6 (1 Pages)