Gear pumps I, IR

Gear pumps I, IR

Design

Gear positive displacement monobloc pumps Pump housing with suction and delivery nozzles located on the same axis with the same diameter (multi-row version).


Application

For combustible oils and lubricating fluids
 

Operating restrictions

Kinematic viscosity from 30 mm2/s (4°E) to 120 mm2/s (15°E).  Fluid temperature less than 90°C.  The ambient temperature is less than 40°С.  Manometric suction lift no more than 4 m.
Continuous operation.

electric motor

Induction motor 4-pole, 50 Hz, 1450 rpm.
I 25/4 , IR 25/4, IRR 25/4E: three-phase - 230/400 V ±10%
IM25/4: single-phase 230 V ±10%
Insulation class "F".
Protective device IP 54.
Device in accordance with IEC 60034.

Special executions on request

- other voltages
- frequency 60 Hz (see catalog for frequency 60 Hz)
- with protection device IP 55
- for higher temperature environments
ComponentMaterial
Pump housingCast iron GJL 200 EN 1561
gear wheelsSteel 18 Ni Cr Mo 5 UNI 8550
ShaftsSteel 18 Ni Cr Mo 5 UNI 8550
Radial shaft sealFPM
Specifications:

n = 1450 rpm

380V220VkWQ(m3/h)Q(l/min)H (m)
I 25/4EIM 25/4E0.250.6102
IR 25/4E0.370.6102.5
IRR 25/4E0.750.610five

Gear pumps I, IR
Gear pumps I, IR
Gear pumps I, IR


pump calpeda I25/4/A

pump calpeda I25/4/A

pump calpeda I25/4/A Head :20m Flow :0.6m3/h Pump power: 0.25kw Pump type : gear Voltage : 380V< /td> Pump material : cast iron Impeller material :18NiCrMo5 < /td> Impeller type :toothed Pump location :horizontal< /td> Type of connection :thread Spigot diameter :1x1inch < /td> Design calpeda I25/4/..

16,524.00грн.

pump calpeda IM25/4/A

pump calpeda IM25/4/A

pump calpeda IM25/4/A Head :20m Flow :0.6m3/h Pump power: 0.25kw Pump type : gear Voltage : 220V< /td> Pump material : cast iron Impeller material :18NiCrMo5 < /td> Impeller type :toothed Pump location :horizontal< /td> Type of connection :thread Spigot diameter :1x1inch < /td> Horizontal rich-foot..

18,022.50грн.

pump calpeda IR25/4/A

pump calpeda IR25/4/A

pump calpeda IR25/4/A Head :25m Flow :0.6m3/h Pump power: 0.37kw Pump type : gear Voltage : 380V< /td> Pump material : cast iron Impeller material :18NiCrMo5 < /td> Impeller type :toothed Pump location :horizontal< /td> Type of connection :thread Spigot diameter :1x1inch < /td> Design pump calpeda ..

17,253.00грн.

pump calpeda IRR25/4/A

pump calpeda IRR25/4/A

pump calpeda IRR25/4/A Head:50m Flow :0.6m3/h Pump power: 0.75kw Pump type : gear Voltage : 380V< /td> Pump material : cast iron Impeller material :18NiCrMo5 < /td> Impeller type :toothed Pump location :horizontal< /td> Type of connection :thread Spigot diameter :1x1inch < /td> Design pump calpeda ..

22,720.50грн.

Showing 1 to 4 of 4 (1 Pages)