Pumps with peripheral impeller CT60, CT61

Pumps with peripheral impeller CT60, CT61

Pumps with peripheral impeller CT60, CT61

Design

Monoblock pumps with working peripheral wheel.  Compact design, patented, with movable motor housing side cover (replaceable when worn).  The motor is protected from water ingress from outside.  Bronze pumps are supplied fully painted.

Application

for clean, non-explosive liquids that do not contain abrasive and suspended particles and are not aggressive to the materials from which the pump is made.
to increase the pressure supplied from the distribution network (observe local standards).  Due to their small dimensions, these electric pumps are excellently suited for installation in various devices and apparatuses of cooling, air conditioning and circulation systems.  .
 

Operating restrictions

Fluid temperature less than 60°C.
The ambient temperature is less than 40°С.
Manometric suction lift no more than 7 m. 
Continuous operation.

electric motor

Induction motor, 2-pole, 50 Hz, 2900 rpm.
CT 61: three-phase - 230/400 V (±10%)
CTM 61: mono-phase 230 V (±10%) with thermal protection device Capacitor built into the terminal box.
Class "F" insulation.
Protective device IP 54.
Device in accordance with EN 60335-2-41.

Special executions on request

other voltage
frequency 60 Hz (see catalog for frequency 60 Hz)
with protection device IP 55
ComponentST 61V-ST 61
Pump housingCast iron GJL 200 EN 1561Bronze G-Cu Sn 10 EN 1982
Engine side coverBrass R-Cu Zn 40 Pb 2 UNI 5705
Working wheelBrass R-Cu Zn 40 Pb 2 UNI 5705
ShaftChrome steel AISI 430
Fur. sealCharcoal - Ceramics - NBR



ComponentST 60V-ST 60
Pump housingCast iron GJL 200 EN 1561Bronze G-Cu Sn 10 EN 1982
Engine side coverBrass R-Cu Zn 40 Pb 2 UNI 5705
Working wheelBrass R-Cu Zn 40 Pb 2 UNI 5705
ShaftChrome steel AISI 430
Fur. sealCharcoal - Ceramics - NBR
Specifications:

n = 2900 rpm

380V220VkWQ(m3/h)Q(l/min)H (m)
CT 61
B-CT 61
CTM 61
B-CTM 61
0.330.48 - 2.38 - 3841 - 5
Pumps with peripheral impeller CT60, CT61

Pumps with peripheral impeller CT60, CT61
Pumps with peripheral impeller CT60, CT61

Pumps with peripheral impeller CT60, CT61


calpeda CT61 pump

calpeda CT61 pump

pump calpeda CT61 Head : 19 m Flow rate: 1.5 m3/h Pump power: 0.33 kW Pump type : vortex Voltage : 380V Pump material : cast iron Wheel material : brass Wheel type : vortex Pump position : horizontal Type of connection : thread Connection diameter : 1x1 inch calpeda ..

4,059.00грн.

pump calpeda B-CT61

pump calpeda B-CT61

pump calpeda B-CT61 Head : 19 m Flow rate: 1.5 m3/h Pump power: 0.33 kW Pump type : vortex Voltage : 380V Pump material : bronze Wheel material : brass Wheel type : vortex Pump location : horizontal Type of connection : thread Connection diameter : 1x1 inch calpeda ..

7,093.00грн.

pump calpeda CTM61

pump calpeda CTM61

pump calpeda CTM61 Head : 19 m Flow rate: 1.5 m3/h Pump power: 0.33 kW Pump type : vortex Voltage : 220V Pump material : cast iron Wheel material : brass Wheel type : vortex Pump position : horizontal Type of connection : thread Connection diameter : 1x1 inch calpeda..

4,059.00грн.

Showing 1 to 3 of 3 (1 Pages)