• pump calpeda NGL3/A

pump calpeda NGL3/A

pump calpeda NGL3/A
Head :30m
Pump power: 0.55kw
Pump type : self-priming up to 9m
Voltage : 380V
Pump material : cast iron
Impeller material :brass
Impeller type :centrifugal
Pump location :horizontal
Type of connection :thread
Spigot diameter :1x1inch

Calpeda NGL3/A pump design.
Self-priming monobloc centrifugal pump with built-in ejector.

Using NGL pumps.
NGL pumps manufactured by the company Calpeda (Italy) designed for well water supply,
for lifting water containing air or other gases,
to increase the pressure of water flowing to the pump by gravity when working under hydraulic pressure,
to increase the pressure of water from the distribution network (observe local standards),
for clean water or slightly polluted surface water, in garden areas, for washing with a strong water jet.

NGL pump operating limits.
Liquid temperature from 0 °C to +35 °C.
The ambient air temperature is not more than 40 °C.
Maximum allowable final pressure in the pump housing: 8 bar.
Continuous mode.

Electric motor for NGL pumps.
Asynchronous 2-pole electric motor, frequency 50 Hz (2800 rpm).
NGL: three-phase 230/400V ±10%, NGLM: single-phase 230V ±10% with thermal protector.
The capacitor is built into the terminal box.
Isolate class "F".
IP 54 Protective Device.
Design according to EN 60335-2-41 (CEI 61-69).

calpeda pump NGL3/A

calpeda NGL3/A pump dimensions

calpeda NGL3/A pump parts

mechanical seal for calpeda NGL3/A pump is in stock

pump calpeda NGL3/A

pump type
pump type самовсасывающий до 9м
flow selection m3/h 2
selection by head in m 30
pump power
pump power, kWt 0.55
voltage, V 380
pump material
pump material чугун
wheel material
wheel material латунь
pump location
pump location горизонтальное
connection type
connection type резьба
wheel type
wheel type центробежное

Write a review

Note: HTML is not translated!
    Bad           Good

pump calpeda NGL3/A

  • Product Code: 70A50030000
  • Availability: In Stock
  • 8,200.00грн.

Tags: pump calpeda NGL3/A