Monoblock horizontal multistage pumps MGP
Monoblock horizontal multistage pumps MGP
Design
Monoblock horizontal multistage pump.
The pump body is cast iron, open on one side only (drum type), the front suction bell is located above the pump shaft and the radial delivery bell is at the top.
The steps are made of noryl.
Application
Water supply.
Use in everyday life, in garden plots and for watering.
Operating restrictions
Liquid temperature from 0°С to +50°С.
The ambient temperature is not more than 40°С.
Maximum allowable final pressure in the pump casing: 8 bar
Continuous operation.
electric motor
Induction motor, 2-pole, 50 Hz, 2900 rpm.
MGP: Three-phase 230/400V ±10%
MGPM: Single-phase 230V ±10% with thermal protector.
The capacitor is built into the terminal box.
Class "F" insulation.
Protection device IP 54.
Design according to EN 60335-2-41 (CEI 61-69).
Special executions on request
other voltages
frequency 60 Hz (see catalog for frequency 60 Hz)
| Component | MGP |
| Pump housing | Cast iron GJL 200 EN 1561 |
| case cover | Chrome nickel steel 1.4301 EN 10088 (AISI 304) |
| pump shaft | Chrome steel 1.4104 EN 10088 (AISI 430) |
| Stage casing Impeller | PPO-GF20 (Noril) PPO-GF20 (Noril) |
| Fur. seal | Ceramic, charcoal, NBR |
download the entire calpeda catalog download the MGP catalog
download manual MGP download spare parts MGP
n = 2800 rpm
|
Monoblock horizontal multistage pumps MGP
calpeda MGPM202 pump
pump calpeda MGPM202 Head : 12.5 m Flow rate: 3 m3/h Pump power: 0.33 kW Pump type : multistage Voltage : 220V Pump material : cast iron Wheel material : noryl Wheel type : centrifugal Pump location : horizontal Type of connection : thread Connection diameter : 1x1 inch ..
6,765.00грн.
calpeda MGPM203 pump
pump calpeda MGPM203 Head : 20 m Flow rate: 3 m3/h Pump power: 0.45 kW Pump type : multistage Voltage : 220V Pump material : cast iron Wheel material : noryl Wheel type : centrifugal Pump location : horizontal Type of connection : thread Connection diameter : 1x1 inch ..
7,175.00грн.
pump calpeda MGP202
pump calpeda MGP202 Head : 12.5 m Flow rate: 3 m3/h Pump power: 0.33 kW Pump type : multistage Voltage : 380V Pump material : cast iron Wheel material : noryl Wheel type : centrifugal Pump location : horizontal Type of connection : thread Connection diameter : 1x1 inch ..
6,765.00грн.
pump calpeda MGP204
pump calpeda MGP204 Head : 26.5 m Flow rate: 3 m3/h Pump power: 0.55 kW Pump type : multistage Voltage : 380V Pump material : cast iron Wheel material : noryl Wheel type : centrifugal Pump location : horizontal Type of connection : thread Connection diameter : 1x1 inch ..
8,159.00грн.
pump calpeda MGP402
pump calpeda MGP402 Head : 12.5 m Flow rate: 5 m3/h Pump power: 0.45 kW Pump type : multistage Voltage : 380V Pump material : cast iron Wheel material : noryl Wheel type : centrifugal Pump location : horizontal Type of connection : thread Connection diameter : 1x1 inch ..
7,544.00грн.