pump INZm32-200/30 made of stainless steel AISI304

electric motor 4kW 220V

capacity 18m3/h

head 43.5m

flange diameter 50x32

analogue CNP pump ZS50-32-200/3 analog speroni pump Cx32-200/3 analog ebara pump 3m32-200/3

IN-AISI pumps according to common classifications are:

- by design - console (unlike type K pumps, the impeller is located directly on the shaft of the driving motor  of a special design or on the intermediate shaft, which is also mounted on the shaft of a conventional flanged or combined mounting motor performance).
- according to the principle of action - centrifugal e, dynamic, vane, with outlet flow at the outlet of the radial type impeller (impeller - closed type).

TECHNICAL DESCRIPTION 

AISI304 stainless steel pump

Original design 

High efficiency motor, IP55 protection class F< /span>

Pump AISI 304 stainless steel body

Impeller made of AISI 304 stainless steel

AISI 304 stainless steel shaft

NSK bearing quality, mechanical wear resistance seal

IN-AISI Cantilever Monoblock Pumps according to the type of pumped medium, they are mainly intended for water (except sea water) and liquids similar to water in density, viscosity (up to 36 cSt). Suitable for use with clean, aggressive liquids that chemical

compatible with pump materials. Pumps must be installed indoors, or at least protected from bad weather.

temperature from -10 ℃ to + 120 ℃

Ambient temperature up to + 50 ℃

Max working pressure 16 bar

Continuous operation

pump INZ 32-200/40 in AISI304 stainless steel

4kW electric motor

capacity 18m3/h

head 43.5m

flange diameter 50x32

IN-AISI pumps according to generally accepted classifications are:

- by design - cantilever (unlike K-type pumps, the impeller is directly on the shaft of the driving electric motor of a special design or on the intermediate shaft, which is also mounted on the shaft of a conventional electric motor of a flanged or combined mounting design). type (impeller - closed type).

TECHNICAL DESCRIPTION 

AISI304 stainless steel pump

Original design 

High efficiency motor, IP55 protection class F< /span>

Pump AISI 304 stainless steel body

Impeller made of AISI 304 stainless steel

AISI 304 stainless steel shaft

NSK bearing quality, mechanical wear resistance seal

IN-AISI Cantilever Monoblock Pumps according to the type of pumped medium, they are mainly intended for water (except sea water) and liquids similar to water in density, viscosity (up to 36 cSt). Suitable for use with clean, aggressive liquids that chemical

compatible with pump materials. Pumps must be installed indoors, or at least protected from bad weather.

temperature from -10 ℃ to + 120 ℃

Ambient temperature up to + 50 ℃

Max working pressure 16 bar

Continuous operation

pump INZ 32-200/40 in AISI304 stainless steel

4kW electric motor

capacity 18m3/h

head 43.5m

flange diameter 50x32

IN-AISI pumps according to generally accepted classifications are:

- by design - cantilever (unlike K-type pumps, the impeller is directly on the shaft of the driving electric motor of a special design or on the intermediate shaft, which is also mounted on the shaft of a conventional electric motor of a flanged or combined mounting design). type (impeller - closed type).

TECHNICAL DESCRIPTION 

AISI304 stainless steel pump

Original design 

High efficiency motor, IP55 protection class F< /span>

Pump AISI 304 stainless steel body

Impeller made of AISI 304 stainless steel

AISI 304 stainless steel shaft

NSK bearing quality, mechanical wear resistance seal

IN-AISI Cantilever Monoblock Pumps according to the type of pumped medium, they are mainly intended for water (except sea water) and liquids similar to water in density, viscosity (up to 36 cSt). Suitable for use with clean, aggressive liquids that chemical

compatible with pump materials. Pumps must be installed indoors, or at least protected from bad weather.

temperature from -10 ℃ to + 120 ℃

Ambient temperature up to + 50 ℃

Max working pressure 16 bar

Continuous operation

pump INZ 32-200/40 in AISI304 stainless steel

4kW electric motor

capacity 18m3/h

head 43.5m

flange diameter 50x32

IN-AISI pumps according to generally accepted classifications are:

- by design - cantilever (unlike K-type pumps, the impeller is directly on the shaft of the driving electric motor of a special design or on the intermediate shaft, which is also mounted on the shaft of a conventional electric motor of a flanged or combined mounting design). type (impeller - closed type).

TECHNICAL DESCRIPTION 

AISI304 stainless steel pump

Original design 

High efficiency motor, IP55 protection class F< /span>

Pump AISI 304 stainless steel body

Impeller made of AISI 304 stainless steel

AISI 304 stainless steel shaft

NSK bearing quality, mechanical wear resistance seal

IN-AISI Cantilever Monoblock Pumps according to the type of pumped medium, they are mainly intended for water (except sea water) and liquids similar to water in density, viscosity (up to 36 cSt). Suitable for use with clean, aggressive liquids that chemical

compatible with pump materials. Pumps must be installed indoors, or at least protected from bad weather.

temperature from -10 ℃ to + 120 ℃

Ambient temperature up to + 50 ℃

Max working pressure 16 bar

Continuous operation

pump INZ 32-200/40 in AISI304 stainless steel

4kW electric motor

capacity 18m3/h

head 43.5m

flange diameter 50x32

IN-AISI pumps according to generally accepted classifications are:

- by design - cantilever (unlike K-type pumps, the impeller is directly on the shaft of the driving electric motor of a special design or on the intermediate shaft, which is also mounted on the shaft of a conventional electric motor of a flanged or combined mounting design). type (impeller - closed type).

TECHNICAL DESCRIPTION 

AISI304 stainless steel pump

Original design 

High efficiency motor, IP55 protection class F< /span>

Pump AISI 304 stainless steel body

Impeller made of AISI 304 stainless steel

AISI 304 stainless steel shaft

NSK bearing quality, mechanical wear resistance seal

IN-AISI Cantilever Monoblock Pumps according to the type of pumped medium, they are mainly intended for water (except sea water) and liquids similar to water in density, viscosity (up to 36 cSt). Suitable for use with clean, aggressive liquids that chemical

compatible with pump materials. Pumps must be installed indoors, or at least protected from bad weather.

temperature from -10 ℃ to + 120 ℃

Ambient temperature up to + 50 ℃

Max working pressure 16 bar

Continuous operation

pump INZ 32-200/40 in AISI304 stainless steel

4kW electric motor

capacity 18m3/h

head 43.5m

flange diameter 50x32

IN-AISI pumps according to generally accepted classifications are:

- by design - cantilever (unlike K-type pumps, the impeller is directly on the shaft of the driving electric motor of a special design or on the intermediate shaft, which is also mounted on the shaft of a conventional electric motor of a flanged or combined mounting design). type (impeller - closed type).

TECHNICAL DESCRIPTION 

AISI304 stainless steel pump

Original design 

High efficiency motor, IP55 protection class F< /span>

Pump AISI 304 stainless steel body

Impeller made of AISI 304 stainless steel

AISI 304 stainless steel shaft

NSK bearing quality, mechanical wear resistance seal

IN-AISI Cantilever Monoblock Pumps according to the type of pumped medium, they are mainly intended for water (except sea water) and liquids similar to water in density, viscosity (up to 36 cSt). Suitable for use with clean, aggressive liquids that chemical

compatible with pump materials. Pumps must be installed indoors, or at least protected from bad weather.

temperature from -10 ℃ to + 120 ℃

Ambient temperature up to + 50 ℃

Max working pressure 16 bar

Continuous operation

pump INZ 32-200/40 in AISI304 stainless steel

4kW electric motor

capacity 18m3/h

head 43.5m

flange diameter 50x32

IN-AISI pumps according to generally accepted classifications are:

- by design - cantilever (unlike K-type pumps, the impeller is directly on the shaft of the driving electric motor of a special design or on the intermediate shaft, which is also mounted on the shaft of a conventional electric motor of a flanged or combined mounting design). type (impeller - closed type).

TECHNICAL DESCRIPTION 

AISI304 stainless steel pump

Original design 

High efficiency motor, IP55 protection class F< /span>

Pump AISI 304 stainless steel body

Impeller made of AISI 304 stainless steel

AISI 304 stainless steel shaft

NSK bearing quality, mechanical wear resistance seal

IN-AISI Cantilever Monoblock Pumps according to the type of pumped medium, they are mainly intended for water (except sea water) and liquids similar to water in density, viscosity (up to 36 cSt). Suitable for use with clean, aggressive liquids that chemical

compatible with pump materials. Pumps must be installed indoors, or at least protected from bad weather.

temperature from -10 ℃ to + 120 ℃

Ambient temperature up to + 50 ℃

Max working pressure 16 bar

Continuous operation

pump INZ 32-200/40 in AISI304 stainless steel

4kW electric motor

capacity 18m3/h

head 43.5m

flange diameter 50x32

IN-AISI pumps according to generally accepted classifications are:

- by design - cantilever (unlike K-type pumps, the impeller is directly on the shaft of the driving electric motor of a special design or on the intermediate shaft, which is also mounted on the shaft of a conventional electric motor of a flanged or combined mounting design). type (impeller - closed type).

TECHNICAL DESCRIPTION 

AISI304 stainless steel pump

Original design 

High efficiency motor, IP55 protection class F< /span>

Pump AISI 304 stainless steel body

Impeller made of AISI 304 stainless steel

AISI 304 stainless steel shaft

NSK bearing quality, mechanical wear resistance seal

IN-AISI Cantilever Monoblock Pumps according to the type of pumped medium, they are mainly intended for water (except sea water) and liquids similar to water in density, viscosity (up to 36 cSt). Suitable for use with clean, aggressive liquids that chemical

compatible with pump materials. Pumps must be installed indoors, or at least protected from bad weather.

temperature from -10 ℃ to + 120 ℃

Ambient temperature up to + 50 ℃

Max working pressure 16 bar

Continuous operation

pump INZ 32-200/40 in AISI304 stainless steel

4kW electric motor

capacity 18m3/h

head 43.5m

flange diameter 50x32

IN-AISI pumps according to generally accepted classifications are:

- by design - cantilever (unlike K-type pumps, the impeller is directly on the shaft of the driving electric motor of a special design or on the intermediate shaft, which is also mounted on the shaft of a conventional electric motor of a flanged or combined mounting design). type (impeller - closed type).

TECHNICAL DESCRIPTION 

AISI304 stainless steel pump

Original design 

High efficiency motor, IP55 protection class F< /span>

Pump AISI 304 stainless steel body

Impeller made of AISI 304 stainless steel

AISI 304 stainless steel shaft

NSK bearing quality, mechanical wear resistance seal

IN-AISI cantilever monobloc pumps

pump type
pump type	центробежный
innings
flow selection m3/h	15
pressure
selection by head in m	35
pump power
pump power, kWt	3
voltage
voltage, V	220
pump material
pump material	нержавейка AISI304
wheel material
wheel material	нержавейка AISI304
pump location
pump location	горизонтальное
connection type
connection type	фланец
wheel type
wheel type	центробежное

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating     Bad           Good

Captcha

Enter the code in the box below

Continue

INZm32-200/30

• 
• Product Code: INZm 32-200/30
• Availability: In Stock

• 28,007.10грн.

Qty Add to Cart

1 reviews / Write a review

---

Tags: pump INZm32-200/30 in stainless steel AISI304