pump calpeda B-NMP32/12FE

td>

	pump calpeda B-NMP32/12FE
Head :	10 m
Flow rate:	13.2 m3/h
Pump power:	0.55 kW
Pump type :	Self-priming centrifugal pump with pre-filter
Voltage :	380 V
Pump material :	bronze
Wheel material :	brass
Wheel type :	centrifugal
Pump location :	horizontal
Type of connection :	thread
Connection diameter :	2x2 inch

pump calpeda B-NMP32/12FE

NMP self-priming pumps are monobloc centrifugal pumps with built-in preliminary th filter.

Using NMP pumps.

For pumping water in pool filtration systems.

For clean or slightly contaminated water with suspended solids.

Operating limits for NMP pumps.

Liquid temperature no more than 60°C.

The ambient temperature is not more than 40°C.

Suction height no more than 7 m.

Maximum allowable final pressure in the pump casing: 6 bar.

Electric motor for Calpeda NMP pumps.

Asynchronous two-pole electric motor, frequency 50 Hz (rpm n = 2900 rpm).

< span style="font-family: Tahoma, Arial, Verdana, Helvetica, sans-serif; font-size: 14px;">NMP: three-phase up to 3 kW - 230/400 V (10%), from 4 to 11 kW - 400/690 V (10%).

NMPM: single-phase 230 . (10%) with thermal protector"F"insulation class.

IP 54 Protective Device.

Designed according to IEC 60034.

Special designs for NMP pumps.

To work with other voltages.

to work at 60Hz.

With IP 55 guard.

Special mechanical seals.

For fluid or elevated temperature environments.

there is a mechanical seal in stock for the calpeda B-NMP32/12FE pump

pump calpeda B-NMP32/12FE