pump calpeda GMG 7-40A
pump calpeda GMG 7-40A | |
Head : | 38m |
Flow : | 12m3/h |
Pump power: | 5kw |
Pump type : | faecal |
Voltage : | 380V |
Pump material : | cast iron |
Impeller material : | cast iron |
Impeller type : | with chopper |
Pump location : | submersible |
Type of connection : | flange |
Spigot diameter : | 40mm |
Application pump calpeda GMG 7-40A
< p style="margin-bottom: 0px; font-size: 14px; padding-bottom: 8px; color: rgb(0, 0, 0); font-family: Tahoma, Arial, Verdana, Helvetica, sans-serif; ">For pumping water containing long fibrous particles, paper or textile materials.Especially recommended for domestic and industrial wastewater applications. Solids max. 6 to 7mm.
Performance
Submersible chopper pumps have a double seal with an oil chamber (lip seal on the motor side for powers up to 1.6 kW) and a DN 40 inlet..
Operational limits
Liquid temperature up to 40°C.
Max diving depth: 20m (with appropriate length wire).
Continuous operation (with water at minimum immersion).
Engine
2-pole induction motor, 50 Hz Single-phase version: 230 V ±10%, with float and remote control with thermal protection and start capacitors. Three-phase version: 400 V ±10% up to 2.7kW
400/690 V ±10% above 2.7 kW Insulation class "H". - Protection IP 68. Max. number of starts: 15 per hour with at regular intervals
Cable: H07RN-F, length 10m
there is a mechanical seal for the pump calpeda GMG 7-40A in stock
pump calpeda GMG 7-40A
pump type | |
pump type | фекальный |
innings | |
flow selection m3/h | 12 |
pressure | |
selection by head in m | 38 |
pump power | |
pump power, kWt | 5 |
voltage | |
voltage, V | 380 |
pump material | |
pump material | чугун |
wheel material | |
wheel material | чугун |
pump location | |
pump location | погружной |
connection type | |
connection type | фланец |
wheel type | |
wheel type | с измельчителем |
Tags: pump calpeda GMG 7-40A