pump calpeda MXAM205
| pump calpeda MXAM205 | |
| Head : | 35.5m |
| Flow : | 3m3/h |
| Pump power: | 0.75kw |
| Pump type : | self-priming up to 8m |
| Voltage : | 220V |
| Pump material : | AISI304 |
| Impeller material : | noryl |
| Impeller type : | centrifugal |
| Pump location : | horizontal |
| Type of connection : | thread |
| Spigot diameter : | 1x1inch |
Design pump calpeda MXAM205.
Monoblock horizontal self-primer multistage pump.
The pump body is monolithic, made of stainless chromium-nickel steel, open only on one side (drum type), the front suction bell is located above the pump shaft and the radial supply bell is at the top.
The steps are made of noryl.
MXA Pump Applications.
MXA water pumps are designed for domestic use,
for gardening and watering.
MXA pump operating limits.
Liquid temperature from 0°C to +35°C.
The ambient air temperature is not more than 40°C.
Suction up to 8m
Maximum allowable final pressure in the pump casing: 8 bar.
Continuous mode.
Electric motor for Calpeda MXA pumps.
Asynchronous 2-pole electric motor, frequency 50 Hz (2800 rpm).
MXA: 3-phase 230/400V ±10%, MXAM: single-phase 230V ±10% with thermal protector.
The condenser is built into the terminal box.
Isolate class "F".
IP 54 Protective Device.
Designed according to EN 60335-2-41 (CEI 61-69).
mechanical seal for calpeda MXAM205 pump is in stock
pump calpeda MXAM205
| pump type | |
| pump type | самовсасывающий до 8м |
| innings | |
| flow selection m3/h | 3 |
| pressure | |
| selection by head in m | 35.5 |
| pump power | |
| pump power, kWt | 0.75 |
| voltage | |
| voltage, V | 220 |
| pump material | |
| pump material | AISI304 |
| wheel material | |
| wheel material | норил |
| pump location | |
| pump location | горизонтальное |
| connection type | |
| connection type | резьба |
| wheel type | |
| wheel type | центробежное |
pump calpeda MXAM205
- Product Code: 663A0051000
- Availability: In Stock
-
15,211.00грн.
Tags: pump calpeda MXAM205